Rasheedat Mahamood

Search results

• 2023

  Characterizing the Effect of Post Weld Heat Treatment on the Mechanical Properties of Laser Beam Welded Additive Manufactured Ti6Al4V

  Akinlabi, E. T., Omoniyi, P. O., Jen, T-C., Mahamood, R. M., Mwema, F., Akinlabi, S. A. & Abima, C. S., 29 Oct 2023, Proceedings of the ASME 2023 International Mechanical Engineering Congress and Exposition. Volume 4: Advanced Materials: Design, Processing, Characterization and Applications; Advances in Aerospace Technology. New Orleans, Louisiana, USA. October 29–November 2, 2023.. American Society of Mechanical Engineers (ASME), 5 p. V004T04A032

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Combined Torrefaction and Densification of Rice Husk: Effect of Process Parameters

  Ibitoye, S. E., Mahamood, R. M., Jen, T. C. & Akinlabi, E. T., 2023, Advances in Material Science and Engineering: Selected Articles from ICMMPE 2021. Emamian, S. S., Awang, M., Razak, J. A. & Masset, P. J. (eds.). Singapore: Springer, p. 201-211 11 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Corrosion Behavior of Laser-Welded Ti6Al4V in 3.5%Wt NaCl

  Omoniyi, P. O., Mahamood, R. M., Arthur, N., Pityana, S., Skhosane, S., Jen, T. C. & Akinlabi, E. T., 2023, Advances in Material Science and Engineering: Selected Articles from ICMMPE 2021. Emamian, S. S., Awang, M., Razak, J. A. & Masset, P. J. (eds.). Singapore: Springer, p. 395-400 6 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Investigation of Mechanical Properties of Torrefied Corncob and Rice Husk Briquettes: Modeling and Simulation

  Ibitoye, S. E., Mahamood, R. M., Jen, T. C. & Akinlabi, E. T., 2023, Advances in Material Science and Engineering: Selected Articles from ICMMPE 2021. Emamian, S. S., Awang, M., Razak, J. A. & Masset, P. J. (eds.). Singapore: Springer, p. 167-175 9 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)
• 2021

  Investigation of the Mechanical and Microstructural Properties of TIG Welded Ti6Al4V Alloy

  Omoniyi, P. O., Mahamood, R. M., Arthur, N., Pityana, S., Akinlabi, S. A., Hassan, S., Okamoto, Y., Maina, M. R. & Akinlabi, E. T., 6 Jul 2021, Advances in Material Science and Engineering : Selected articles from ICMMPE 2020. Awang, M. & Emamian, S. S. (eds.). 1st ed. Singapore: Springer, p. 111-118 8 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  8 Citations (Scopus)
• 2020

  Effect of process parameters on the hardness property of laser metal deposited al–cu–ti coatings on ti–6al–4v alloy

  Lasisi, A. M., Fatoba, O. S., Akinlabi, S. A., Mahamood, R. M., Shatalov, M. Y., Murashkin, E. V., Hassan, S. & Akinlabi, E. T., 1 Sept 2020, Advances in Manufacturing Engineering - Selected Articles from ICMMPE 2019. Emamian, S. S., Yusof, F. & Awang, M. (eds.). Springer, p. 523-529 7 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  4 Citations (Scopus)

• Experimental investigation of laser metal deposited al–cu–ti coatings on ti–6al–4v alloy

  Lasisi, A. M., Fatoba, O. S., Akinlabi, S. A., Mahamood, R. M., Shatalov, M. Y., Murashkin, E. V., Hassan, S. & Akinlabi, E. T., 1 Sept 2020, Advances in Manufacturing Engineering - Selected Articles from ICMMPE 2019. Emamian, S. S., Yusof, F. & Awang, M. (eds.). Springer, p. 515-522 8 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Laser metal deposition of titanium composites: A review

  Akinlabi, E. T., Soliu, G. A., Mahamood, R. M., Akinlabi, S. A., Hassan, S., Shatalov, M. Y., Murashkin, E. & Fatoba, O. S., 1 Sept 2020, Advances in Manufacturing Engineering - Selected Articles from ICMMPE 2019. Emamian, S. S., Yusof, F. & Awang, M. (eds.). Springer, p. 555-564 10 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Study of additive manufactured ti–al–si–cu/ti–6al–4v composite coating by direct laser metal deposition (dlmd) technique

  Naidoo, L. C., Fatoba, O. S., Akinlabi, S. A., Mahamood, R. M., Shatalov, M. Y., Murashkin, E. V., Hassan, S. & Akinlabi, E. T., 1 Sept 2020, Advances in Manufacturing Engineering - Selected Articles from ICMMPE 2019. Emamian, S. S., Yusof, F. & Awang, M. (eds.). Springer, p. 503-513 11 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)
• 2019

  Laser Metal Deposition of Titanium Alloy (Ti6Al4V): A Review

  Akinlabi, E. T., Okamoto, Y., Maina, M. R., Akinlabi, S. A., Pityana, S., Tlotleng, M., Soliu, G. A. & Mahamood, R. M., 24 Aug 2019, 2019 International Conference on Engineering, Science, and Industrial Applications, ICESI 2019. Hershey, Pennsylvania: Institute of Electrical and Electronics Engineers Inc., 5 p. 8863018. (2019 International Conference on Engineering, Science, and Industrial Applications, ICESI 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Wear Resistance Behaviour of Laser Additive Manufacture Materials: An Overview

  Mahamood, R. M., Okamoto, Y., Maina, M. R., Akinlabi, S. A., Pityana, S., Tlotleng, M. & Akinlabi, E. T., Aug 2019, 2019 International Conference on Engineering, Science, and Industrial Applications, ICESI 2019. Institute of Electrical and Electronics Engineers Inc., 8863016. (2019 International Conference on Engineering, Science, and Industrial Applications, ICESI 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)
• 2017

  Effect of laser power and powder flow rate on dilution rate and surface finish produced during laser metal deposition of Titanium alloy

  Mahamood, R. M., Akinlabi, E. T. & Owolabi, M. G., 2 May 2017, Proceedings of 2017 8th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2017. Institute of Electrical and Electronics Engineers Inc., p. 6-10 5 p. 7917405. (Proceedings of 2017 8th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2017).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  13 Citations (Scopus)

• Gas Flow Rate and Scanning Speed influence on microstructure and Microhardness Property of Laser Metal Deposited Titanium-alloy

  Mahamood, R. M. & Akinlabi, E. T., 16 Apr 2017, Proceedings of the Second International Conference on Mechanics, Materials and Structural Engineering (ICMMSE 2017). Atlantis Press, p. 102-108 7 p. (Advances in Engineering Research).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File
  7 Downloads (Pure)

• Influence of Powder Flow Rate on Properties of Laser Deposited Titanium Alloy -Ti6Al4V

  Mahamood, R. M. & Akinlabi, E. T., 16 Apr 2017, Proceedings of the Second International Conference on Mechanics, Materials and Structural Engineering (ICMMSE 2017). Atlantis Press, (Advances in Engineering Research).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File
  20 Downloads (Pure)
• 2016

  Achieving mass customization through additive manufacturing

  Mahamood, R. M. & Akinlabi, E. T., 10 Jul 2016, Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future - Proceedings of the AHFE International Conference on Human Aspects of Advanced Manufacturing, 2016. Trzcieliński, S. & Schlick, C. (eds.). Cham, Switzerland: Springer, p. 385-390 6 p. (Advances in Intelligent Systems and Computing; vol. 490).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  10 Citations (Scopus)

• Effect of scanning speed and gas flow rate on surface roughness of LMD titanium-alloy

  Mahamood, R. M. & Akinlabi, E. T., 21 Oct 2016, Proceedings of the World Congress on Engineering and Computer Science 2016. Ao, S. I., Douglas, C. & Grundfest, W. S. (eds.). Newswood Limited, p. 958-962 5 p. (Lecture Notes in Engineering and Computer Science; vol. 2226).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  1 Citation (Scopus)

• Laser power and scanning speed influence on intermetallic and wear behaviour of Laser metal deposited titanium alloy composite

  Mahamood, R. M. & Akinlabi, E. T., 21 Oct 2016, WCECS 2016 - World Congress on Engineering and Computer Science 2016. Grundfest, W. S., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2. p. 1037-1040 4 p. (Lecture Notes in Engineering and Computer Science; vol. 2226).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  1 Citation (Scopus)
• 2014

  Effect of laser power on surface finish during Laser Metal Deposition process

  Mahamood, R. M. & Akinlabi, E. T., 2014, Effect of laser power on surface finish during Laser Metal Deposition process. Newswood Limited, Vol. 2. p. 965-969 5 p. 109530

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  16 Citations (Scopus)

• Effect of processing parameters on the properties of laser metal deposited Ti6Al4V using design of experiment

  Mahamood, R. M., Akinlabi, E. T., Shukla, M. & Pityana, S., 2014, IAENG Transactions on Engineering Sciences. p. 331-339

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  9 Citations (Scopus)
• 2012

  Adaptive PDPID with iterative learning for two-link flexible manipulator

  Mahamood, R. M., 2012, Proceedings of the World Congress on Engineering 2012, WCE 2012. Korsunsky, A. M., Gelman, L., Hunter, A., Ao, S. I. & Hukins, D. WL. (eds.). Newswood Limited, p. 1710-1715 6 p. (Lecture Notes in Engineering and Computer Science; vol. 3).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  2 Citations (Scopus)

• Direct adaptive hybrid Pd-Pid controller for two-link flexible robotic manipulator

  Mahamood, R. M., 26 Oct 2012, Proceedings of the World Congress on Engineering and Computer Science 2012. Douglas, C., Burgstone, J., Grundfest, W. S. & Ao, S. I. (eds.). Newswood Limited, p. 1127-1132 6 p. (Lecture Notes in Engineering and Computer Science; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  7 Citations (Scopus)

• Effect of laser power on material efficiency, layer height and width of laser metal deposited Ti6Al4V

  Mahamood, R. M., Akinlabi, E. T., Shukla, M. & Pityana, S., 26 Oct 2012, Proceedings of the World Congress on Engineering and Computer Science 2012. Douglas, C., Burgstone, J., Grundfest, W. S. & Ao, S. I. (eds.). Newswood Limited, Vol. 2. p. 1433-1438 6 p. (Lecture Notes in Engineering and Computer Science; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  19 Citations (Scopus)

• Functionally graded material: An overview

  Mahamood, R. M., Akinlabi, E. T., Shukla, M. & Pityana, S., 6 Jul 2012, Proceedings of the World Congress on Engineering 2012, WCE 2012. Korsunsky, A. M., Gelman, L., Hunter, A., Ao, S. I. & Hukins, D. WL. (eds.). Newswood Limited, p. 1593-1597 5 p. (Lecture Notes in Engineering and Computer Science; vol. 3).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  170 Citations (Scopus)
• 2011

  Hybrid PD/PID controller design for two-link flexible manipulators

  Mahamood, R. M. & Pedro, J. O., 20 Jun 2011, ASCC 2011 - 8th Asian Control Conference - Final Program and Proceedings. p. 1358-1363 6 p. 5899270. (ASCC 2011 - 8th Asian Control Conference - Final Program and Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  27 Citations (Scopus)