A repair method of cracked shear walls with stainless steel rods and fibres

Marco Corradi*, Emanuela Speranzini, Alessio Molinari

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

Abstract

In this paper destructive shear testing was conducted by installing various sensors and instruments at critical locations of full-scale masonry walls. The purpose of this research was to determine through laboratory testing the effectiveness of new repair methods, used as a seismic retrofit of seriously cracked shear walls. Testing was performed on several different types of walls (brickwork and stone masonry). This experimental campaign is divided in two parts: FRCMs (Fiber Reinforced Cementitious Mortars) were initially employed to reinforce the walls and, after testing, stainless steel anchors and other materials have been used to “locally” repair the shear walls (crack sealing), and re-tested. The evaluation methods included the analysis of the lateral load capacities and stiffness characteristics, the failure modes, also implemented to detect any debonding phenomenon between the FRCM retrofit system and the masonry substrate. An evaluation of the overall structural behaviour of the walls before and after reinforcement, and again after the repair, is presented. The results indicate that several conditions have an effect on the efficiency of the composite repair. Shear-load capacity, shear strength and stiffness, wall ductility are considered in the analysis.
Original languageEnglish
Article number115739
Number of pages11
JournalComposite Structures
Volume293
Early online date13 May 2022
DOIs
Publication statusE-pub ahead of print - 13 May 2022

Fingerprint

Dive into the research topics of 'A repair method of cracked shear walls with stainless steel rods and fibres'. Together they form a unique fingerprint.

Cite this