An effect of fault current limiter to distributed generator shaft torque increase under voltage sag

Takayuki Tanabe; Toshihisa Funabashi; Hitomi Otoguro; Juan Martinez; Ghanim Putrus; Goro Fujita; Kaoru Koyanagi; Ryuichi Yokoyama

doi:10.1541/ieejpes.127.981

An effect of fault current limiter to distributed generator shaft torque increase under voltage sag

Takayuki Tanabe, Toshihisa Funabashi, Hitomi Otoguro, Juan Martinez, Ghanim Putrus, Goro Fujita, Kaoru Koyanagi, Ryuichi Yokoyama

Mathematics, Physics and Electrical Engineering

Research output: Contribution to journal › Article › peer-review

3 Citations (Scopus)

Abstract

Voltage sags originated at the transmission level can have a very adverse effect on distributed generators running at distribution levels. A fault current limiter (FCL) can be an effective means to limit the voltage sag impact. This paper presents the main results of a research based on digital simulation and aimed at studying the effectiveness of a FCL to limit the impact of voltage sag on the shaft torque of distributed generators. The sensitivity of the shaft torque to parameters of the FCL, the power system and the fault is analyzed.

Original language	English
Pages (from-to)	1-986
Journal	IEEJ Transactions on Power and Energy
Volume	127
Issue number	9
DOIs	https://doi.org/10.1541/ieejpes.127.981
Publication status	Published - 2007

Access to Document

10.1541/ieejpes.127.981

Cite this

@article{7f1f38ea0dea4cc6a1d99c224c0ab734,

title = "An effect of fault current limiter to distributed generator shaft torque increase under voltage sag",

abstract = "Voltage sags originated at the transmission level can have a very adverse effect on distributed generators running at distribution levels. A fault current limiter (FCL) can be an effective means to limit the voltage sag impact. This paper presents the main results of a research based on digital simulation and aimed at studying the effectiveness of a FCL to limit the impact of voltage sag on the shaft torque of distributed generators. The sensitivity of the shaft torque to parameters of the FCL, the power system and the fault is analyzed.",

keywords = "ATP-EMTP, cogeneration systems, distributed generation, fault current limiter, voltage sag",

author = "Takayuki Tanabe and Toshihisa Funabashi and Hitomi Otoguro and Juan Martinez and Ghanim Putrus and Goro Fujita and Kaoru Koyanagi and Ryuichi Yokoyama",

year = "2007",

doi = "10.1541/ieejpes.127.981",

language = "English",

volume = "127",

pages = "1--986",

journal = "IEEJ Transactions on Power and Energy",

issn = "0385-4213",

publisher = "The Institute of Electrical Engineers of Japan",

number = "9",

}

TY - JOUR

T1 - An effect of fault current limiter to distributed generator shaft torque increase under voltage sag

AU - Tanabe, Takayuki

AU - Funabashi, Toshihisa

AU - Otoguro, Hitomi

AU - Martinez, Juan

AU - Putrus, Ghanim

AU - Fujita, Goro

AU - Koyanagi, Kaoru

AU - Yokoyama, Ryuichi

PY - 2007

Y1 - 2007

N2 - Voltage sags originated at the transmission level can have a very adverse effect on distributed generators running at distribution levels. A fault current limiter (FCL) can be an effective means to limit the voltage sag impact. This paper presents the main results of a research based on digital simulation and aimed at studying the effectiveness of a FCL to limit the impact of voltage sag on the shaft torque of distributed generators. The sensitivity of the shaft torque to parameters of the FCL, the power system and the fault is analyzed.

AB - Voltage sags originated at the transmission level can have a very adverse effect on distributed generators running at distribution levels. A fault current limiter (FCL) can be an effective means to limit the voltage sag impact. This paper presents the main results of a research based on digital simulation and aimed at studying the effectiveness of a FCL to limit the impact of voltage sag on the shaft torque of distributed generators. The sensitivity of the shaft torque to parameters of the FCL, the power system and the fault is analyzed.

KW - ATP-EMTP

KW - cogeneration systems

KW - distributed generation

KW - fault current limiter

KW - voltage sag

U2 - 10.1541/ieejpes.127.981

DO - 10.1541/ieejpes.127.981

M3 - Article

VL - 127

SP - 1

EP - 986

JO - IEEJ Transactions on Power and Energy

JF - IEEJ Transactions on Power and Energy

SN - 0385-4213

IS - 9

ER -

An effect of fault current limiter to distributed generator shaft torque increase under voltage sag

Abstract

Access to Document

Fingerprint

Cite this