Abstract
In this research, studies were done on the material characterization of type 304 austenitic stainless steel weld produced by TIG and MIG welding processes. This research is aimed to establish optimized process parameters that will result in a defect-free weld joint, homogenous distribution of the iron (Fe), Chromium (Cr) and Nickel (Ni) was observed at the welded joint of all the six samples. The welded sample produced at the current of 170 A by TIG welding process had the highest UTS value of 621 MPa at the welds zone, and the welded sample produced by MIG process at the welding current of 150 A had the lowest UTS value of 568 MPa. However, it was established that TIG welding process is more appropriate for the welding of type 304 austenitic stainless steel compared to the MIG welding process.
| Original language | English |
|---|---|
| Article number | 022074 |
| Number of pages | 9 |
| Journal | Journal of Physics: Conference Series |
| Volume | 1378 |
| Issue number | 2 |
| DOIs | |
| Publication status | Published - 1 Dec 2019 |
| Externally published | Yes |
| Event | 3rd International Conference on Engineering for Sustainable World, ICESW 2019 - Ota, Nigeria Duration: 3 Jul 2019 → 8 Jul 2019 |
Keywords
- average yield strength
- EDS analysis
- microstructure
- MIG welding
- TIG welding
- UTS