Computer-integrated manufacturing system for tube bending

Guofu Ding; Lei Jiang; Sheng-feng Qin; Shaowei Zhu; Shuwen Ma

doi:10.1080/0951192X.2012.684710

Computer-integrated manufacturing system for tube bending

Guofu Ding, Lei Jiang, Sheng-feng Qin, Shaowei Zhu, Shuwen Ma

Research output: Contribution to journal › Article › peer-review

7 Citations (Scopus)

Abstract

This paper presents a distributed and integrated manufacturing system for tube bending. It can support a Client/Server based local network and serial communications. It can also integrate tube design, process planning, virtual and physical manufacturing around the core of engineering databases with different formats. This system solves three problems in integrated tube design and bending: (1) automatic process planning, (2) estimation of the feasibility of bending and (3) the impact of springback and extension. The industrial applications of this system show that it can decrease the cost of bending and increase the bending efficiency.

Original language	English
Pages (from-to)	1059-1068
Journal	International Journal of Computer Integrated Manufacturing
Volume	25
Issue number	11
DOIs	https://doi.org/10.1080/0951192X.2012.684710
Publication status	Published - May 2012

Keywords

tube bending
feasibility of bending
networking manufacturing
CIMS
springback
extension

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1080/0951192X.2012.684710

Cite this

@article{7de527165dcf4d4da464c08813d6e1b0,

title = "Computer-integrated manufacturing system for tube bending",

abstract = "This paper presents a distributed and integrated manufacturing system for tube bending. It can support a Client/Server based local network and serial communications. It can also integrate tube design, process planning, virtual and physical manufacturing around the core of engineering databases with different formats. This system solves three problems in integrated tube design and bending: (1) automatic process planning, (2) estimation of the feasibility of bending and (3) the impact of springback and extension. The industrial applications of this system show that it can decrease the cost of bending and increase the bending efficiency.",

keywords = "tube bending, feasibility of bending, networking manufacturing, CIMS, springback, extension",

author = "Guofu Ding and Lei Jiang and Sheng-feng Qin and Shaowei Zhu and Shuwen Ma",

year = "2012",

month = may,

doi = "10.1080/0951192X.2012.684710",

language = "English",

volume = "25",

pages = "1059--1068",

journal = "International Journal of Computer Integrated Manufacturing",

issn = "0951-192X",

publisher = "Taylor & Francis",

number = "11",

}

TY - JOUR

T1 - Computer-integrated manufacturing system for tube bending

AU - Ding, Guofu

AU - Jiang, Lei

AU - Qin, Sheng-feng

AU - Zhu, Shaowei

AU - Ma, Shuwen

PY - 2012/5

Y1 - 2012/5

N2 - This paper presents a distributed and integrated manufacturing system for tube bending. It can support a Client/Server based local network and serial communications. It can also integrate tube design, process planning, virtual and physical manufacturing around the core of engineering databases with different formats. This system solves three problems in integrated tube design and bending: (1) automatic process planning, (2) estimation of the feasibility of bending and (3) the impact of springback and extension. The industrial applications of this system show that it can decrease the cost of bending and increase the bending efficiency.

AB - This paper presents a distributed and integrated manufacturing system for tube bending. It can support a Client/Server based local network and serial communications. It can also integrate tube design, process planning, virtual and physical manufacturing around the core of engineering databases with different formats. This system solves three problems in integrated tube design and bending: (1) automatic process planning, (2) estimation of the feasibility of bending and (3) the impact of springback and extension. The industrial applications of this system show that it can decrease the cost of bending and increase the bending efficiency.

KW - tube bending

KW - feasibility of bending

KW - networking manufacturing

KW - CIMS

KW - springback

KW - extension

U2 - 10.1080/0951192X.2012.684710

DO - 10.1080/0951192X.2012.684710

M3 - Article

SN - 0951-192X

VL - 25

SP - 1059

EP - 1068

JO - International Journal of Computer Integrated Manufacturing

JF - International Journal of Computer Integrated Manufacturing

IS - 11

ER -

Computer-integrated manufacturing system for tube bending

Abstract

Keywords

UN SDGs

Access to Document

Fingerprint

Cite this