@inproceedings{32ac7ce2830c45a88e105df30c4bcb52,
title = "Numerical Modelling and Influence of Cu Addition on the Microstructure and Mechanical Properties of Additive Manufactured Ti–Al–Cu/Ti–6Al–4V Composite",
abstract = "Laser metal deposition technique was used for the fabrication of Ti–Al–Cu coating on Ti–6Al–4V Alloy. The microstructure and elemental and phase composition of coatings were studied. The SEM images showed the homogeneous distribution of Cu addition in Ti–10Al–9Cu at scanning speed of 1.0 m/min. Strong metallurgical bond without pores and cracks were observed between the coating and the substrate. Grain refinement was observed within the microstructure as the grains grew in a columnar and dendritic pattern in a counter direction to heat flow. However, the cross-section microstructures of Ti–10Al–6Cu and Ti–10Al–3Cu at 0.8 and 1.0 m/min scanning speed and laser power of 1000 and 1100 W showed minute pores and cracks. The existence of amorphous phase revealed via XRD was also observed in the coatings. The microstructure of these alloys is highly influenced by processes involving plastic deformation and thermal treatments which, in effect, determines the mechanical properties adhering to desired properties. The microhardness testing results indicated that the fabricated coatings had enhanced by 61.9% as compared to the micro-hardness of the Ti–6Al–4V alloy substrate.",
keywords = "Copper, Hardness, Microstructure, Temperature distribution, Ti–6Al–4V alloy, Ti–Al–Cu coatings",
author = "Akinlabi, {E. T.} and Fatoba, {O. S.} and Akinlabi, {S. A.}",
year = "2019",
month = feb,
day = "10",
doi = "10.1007/978-3-030-05728-2_13",
language = "English",
isbn = "9783030057275",
series = "Minerals, Metals and Materials Series",
publisher = "Springer",
pages = "143--152",
editor = "Samuel Wagstaff and Antoine Allanore and Guillaume Lambotte and Jonghyun Lee",
booktitle = "Materials Processing Fundamentals, 2019",
address = "Germany",
note = "Materials Processing Fundamentals Symposium held at the TMS Annual Meeting and Exhibition, 2019 ; Conference date: 10-03-2019 Through 14-03-2019",
}