The scalar control of brush-less doubly fed reluctance machines

James Yu; Milutin Jovanovic

The scalar control of brush-less doubly fed reluctance machines

Northumbria University

Research output: Contribution to conference › Paper › peer-review

Abstract

The Brush-less Doubly-Fed Reluctance Machine (BDFRM) is drawing more attention because of its low producing capital. The paper is trying to treat this new kind of motor as a special kind of induction machine. The torque producing principle has been revealed. And the relationship of three speeds was yielded from the calculation. based on the matrix(differential equations), a model of bdfrm was built with software of matlab. At the moment, two scalar control methods: One is open loop V/F, and the other is close-loop (P.I.) were applied to the test. From the simulation results, it is obvious that the new machine can achieve the required response.

Original language	English
Publication status	Published - Sept 2001
Event	UPEC 2001 - 36th Universities Power Engineering Conference - Swansea, UK Duration: 1 Sept 2001 → … http://ewh.ieee.org/cmte/ips/UPEC/UPEC01ReportSwansea.pdf

Conference

Conference	UPEC 2001 - 36th Universities Power Engineering Conference
Period	1/09/01 → …
Internet address	http://ewh.ieee.org/cmte/ips/UPEC/UPEC01ReportSwansea.pdf

Cite this

@conference{ca021462a7ab43209740b1bb7f2b0494,

title = "The scalar control of brush-less doubly fed reluctance machines",

abstract = "The Brush-less Doubly-Fed Reluctance Machine (BDFRM) is drawing more attention because of its low producing capital. The paper is trying to treat this new kind of motor as a special kind of induction machine. The torque producing principle has been revealed. And the relationship of three speeds was yielded from the calculation. based on the matrix(differential equations), a model of bdfrm was built with software of matlab. At the moment, two scalar control methods: One is open loop V/F, and the other is close-loop (P.I.) were applied to the test. From the simulation results, it is obvious that the new machine can achieve the required response.",

author = "James Yu and Milutin Jovanovic",

year = "2001",

month = sep,

language = "English",

note = "UPEC 2001 - 36th Universities Power Engineering Conference ; Conference date: 01-09-2001",

url = "http://ewh.ieee.org/cmte/ips/UPEC/UPEC01ReportSwansea.pdf",

}

TY - CONF

T1 - The scalar control of brush-less doubly fed reluctance machines

AU - Yu, James

AU - Jovanovic, Milutin

PY - 2001/9

Y1 - 2001/9

N2 - The Brush-less Doubly-Fed Reluctance Machine (BDFRM) is drawing more attention because of its low producing capital. The paper is trying to treat this new kind of motor as a special kind of induction machine. The torque producing principle has been revealed. And the relationship of three speeds was yielded from the calculation. based on the matrix(differential equations), a model of bdfrm was built with software of matlab. At the moment, two scalar control methods: One is open loop V/F, and the other is close-loop (P.I.) were applied to the test. From the simulation results, it is obvious that the new machine can achieve the required response.

AB - The Brush-less Doubly-Fed Reluctance Machine (BDFRM) is drawing more attention because of its low producing capital. The paper is trying to treat this new kind of motor as a special kind of induction machine. The torque producing principle has been revealed. And the relationship of three speeds was yielded from the calculation. based on the matrix(differential equations), a model of bdfrm was built with software of matlab. At the moment, two scalar control methods: One is open loop V/F, and the other is close-loop (P.I.) were applied to the test. From the simulation results, it is obvious that the new machine can achieve the required response.

M3 - Paper

T2 - UPEC 2001 - 36th Universities Power Engineering Conference

Y2 - 1 September 2001

ER -

The scalar control of brush-less doubly fed reluctance machines

Abstract

Conference

Fingerprint

Cite this